Topic: City Water Check Valve Replacement (Read 1983 times) previous topic - next topic

Has anyone had the replace the Water Check valve in their unit, and if so how did you do it.
Does the complete utility panel have to be removed or is there another way to get behind the valve to unscrew it from the connection?
Can't seem to be able the pull the valve away from the utility frame enough to unscrew it.
Any help would be appreciated.

Would also like to know, looks like out the back only. 
And it’s a special valve, won’t find it in a hardware store.

How could it be bad already on a 2020 LTV?  And if a 2020 model it should be under warranty.

Sorry should have mentioned it's a friends 2017 Unity

Is it the full that is leaking?  If so, that would be due to the water fill valve because there isn't a check valve. 
If so, check out the last post in this thread:  Water Fill Selector Valve

If the fresh water tank is overflowing when on city water and the pump is on may be this:
Water tank filling with valve on city water

There is a check valve in the San-T_Flush connector.  But I don't think you are referring to that one.